BEST-TENT halls are made from high quality attested and certified materials. Our halls are calculated taking into account full snow and wind loads according to the EUROCODE, applicable to the place of their location. Thanks to the wide range of sizes as well as the quality and aesthetic appearance of materials used, the applications of our halls are unlimited and their simple assembly and disassembly by our qualified staff enables their extensive use.
We offer our Customers modular halls, adapting their dimensions to specific needs. The tent hall modules are offered in sizes every 2, 3, 4, 5 or 6 meters, depending on the required snow and wind loads. It allows to adequately shorten or extend the halls by disassembling or adding subsequent modules.
The selection of our tent halls includes many options in terms of their types, dimensions and applications. It is the Customer that decides about the configuration of the hall.


BEST-TENT halls are the synonym of:

Our halls are produced in accordance with the requirements of EN 1090-2 standard and are CE certified. It means that only the highest quality materials were used to manufacture them and each stage of the production process was verified many times. The tarpaulin materials used by us come from leading European producers and have the required fire resistance attestation.


BEST-TENT halls are designed for snow and wind loads appropriate for the place of their location, thanks to which they are safe (can be used all year round) and do not require additional maintenance in winter.


The high quality of both the covering and the structure as well as the possibility of placing advertising graphics make BEST-TENT halls attractive in terms of aesthetics and often convert them into advertisements.


Short execution time from the moment of placing the order (between 30 and 60 days) and the experience of our fitting team enable fast construction of a tent hall from the moment the decision on the purchase is made.


BEST-TENT halls are designed to specific orders and additional equipment as well as the possibility of providing thermal insulation or placing a graphic design make them really unique.


Our offer includes the manufacturing of the hall, preparation of design documentation (construction part), transport and supply in all Europe, professional assembly as well as warranty and post-warranty servicing.



  • pitched,                       
  • multi-hipped,                       
  • arched,
  • spherical,

with a wide range of applications.



  • pitched.                       


Primarily used as warehouse or event halls.

  • ST – steel halls with a one-bay galvanised truss. The standard covering is a fire resistance certified PVC material with the thickness of 900gr/m2. The hall walls can be made from trapezoidal sheets and composite panels. Their resistant structure permits various applications: from warehouse halls to agricultural and sports facilities to airplane hangars.
  • AL – one-bay steel and aluminium halls, which thanks to their lightweight structure enable fast assembly and disassembly. The standard covering is a fire resistance certified PVC material with the thickness of 650gr/m2; OPAK material (blocking the sunlight) with the thickness of 800gr/m2 is another option. Depending on the solutions used, they can serve as resistant warehouse halls or aesthetic event halls, perfect to organize different celebrations.  


On this page you can find the price list of our tent halls. You will also find out why there is a price difference between a 10x20 hall and a 20x10 hall and why different producers charge different prices for the same dimensions.


If you want to be fully satisfied with the hall, you should pay attention to very important factors affecting not only the price, but also safety.


Hall configuration

A 10x20 hall and a 20x10 hall are two different tent halls.
The basic difference is the quantity of steel or aluminium used, the configuration of joints, bigger elements and roof cross pieces. Generally speaking, the materials used allowing to make a given type of structure.


Calculations for each tent hall should be reliable and the structural design of the hall based on them should be signed by an authorised constructor. BEST-POL Sp. z o.o. employs many qualified and experienced constructors and uses the services of many external design studios, which guarantees the precision of calculations and perfect adaptation to your expectations.


Wind and snow loads
The valuation of a tent hall can differ depending on its location. Poland is divided into wind and snow zones and, theoretically, the same hall (e.g. size 10x20m) will differ according to its intended location. Tent halls in different localizations will be constructed in such a way as to make them resistant to all atmospheric conditions at a given area. For this reason, a hall installed in the south of Italy will differ from a hall localized in the north of Norway. The same rule applies to Poland.


Place of assembly
Not always a given tent can be assembled in the traditional way in a location indicated by the customer. Specialist equipment must be used in places that are difficult to reach, which also affects the price. It is important to provide photos from the planned location of the tent hall before its construction can start.


When choosing the producer of a tent hall, one should pay attention not only to drawings of aluminium profiles used to construct the hall, but in particular to the calculated and provided snow and wind parameters. Some producers offer halls at low prices, saving on the dimensions of the aluminium profile and other materials or understating the required snow and wind parameters for a given area.


Attention should also be paid to the total weight of the whole structure, which is also important in terms of adapting a given structure to, e.g. atmospheric conditions at a given area. The type of the steel profile used is also important. For example, S355 is construction steel with a higher price, while S235 is characterized by lower resistance, but is cheaper as well.

Regardless of the type of the structure, we primarily opt for appropriate resistance to snow and wind as well as the quality and class of materials, therefore, we choose the suppliers of materials and services with great care.


Materials from leading producers:

  • Aluminium:  KĘTY Group
  • Composite panels: KINGSPANan
  • Trapezoidal sheets: BUDMAT
  • Tarpaulin fittings: Franz Miederhoff
  • Heat sealing equipment: FIAB, ZEMAT, LEISTER


BEFORE you choose the producer and BUY a HALL, you should check what snow and wind parameters are obligatory for a given area and, based on this, you should start to look for offers meeting these requirements. Any offer of a PERMANENT (YEAR-ROUND) hall with a note in small print saying that in case of snowfall snow should be cleared, the hall should be heated or disassembled only means that it does not meet these parameters and you should exclude it.